Anticorrosive fans designed for rooftop installation
Centrifugal fans with rectangular adapter on the polypropylene inlet for roof installation. Anticorrosive plastic thermoformed fans made of polypropylene, grey (RAL-7032) or black (PP-EL-s for ATEX fans). These models include a rectangular anti-corrosion adapter on the inlet for rooftop installation. Available with three-phase and single-phase motors as well as ATEX Zone I and II classification (2G and 3G). IP-55 protection with 1500 and 3000rpm motors. Maximum recommended working temperature -10ºC to +100ºC. Motors with IE2 efficiency up to 0.55kW. Superior models IE3 efficiency. Rooftop fans include:motor protector, anti-bird outlet and an inlet adapter of 606x606x50mm.
*The ECODESIGN Directive 2009/125/EC does not apply to the range of anti-corrosion fans.
Motors:
– 2, 4 and 6 poles, according to version
– Standard supply voltage 230-400v 50Hz
– Special 60Hz windings on request
Single-phase models 230V 50/Hz, on request
– Motors with powers above 0.55kW energy efficiency IE3
Fan accessories
Frequency inverter
Wall mounting bracket
Floor mounting bracket
Anti-bird grid
Expansion hat
Engine cover
Inspection register
Anti-vibration
Soundproof box
Fender grille
Coupling flange
Electrical panel
Isolator switch
Ventilation pipes and accessories
Flexible Sleeve
Flexible sleeve corrugated
Flexible Ventilation hose
Strap Clamp
Volume control damper
Volume control damper motorized 0º-90º
Flap trap
Reductions
T-Pieces 90º
T-Pieces 45º
End caps
Trims
Umbrella. Rain protection
Rod roll
Sampling piece
Differential pressure probes
Intumescent rings
Fire dampers
Silencer
Table of power values
M SERIES PP STANDARD ROOF
| Description | Turbine speed r.p.m. | Motor power kW | Max. flow rate (m3/h) | Max. pressure (mmca) | Sound pressure level (dB) | Weight (Kg) | Max. intensity 230v (A) | Max. intensity 400v (A) |
| M-75 at 1500 rpm Roof | 1,500 | 0.06 | 110 | 6 | 52 | 3 | 0.6 | 0.25 |
| M-75 at 3000 rpm Roof | 3,000 | 0.06 | 210 | 25 | 64 | 3 | 0.8 | 0.31 |
| M-140 at 1500 rpm Roof | 1,500 | 0.09 | 405 | 34 | 56 | 6.5 | 0.8 | 0.37 |
| M-140 at 3000 rpm Roof | 3,000 | 0.09 | 615 | 51 | 60 | 6.5 | 0.8 | 0.31 |
| M-160 at 1500 rpm Roof | 1,500 | 0.25 | 830 | 20 | 54 | 10 | 1.7 | 0.76 |
| M-160 at 3000 rpm Roof | 3,000 | 0.37 | 1,600 | 70 | 69 | 10 | 2.6 | 0.95 |
| M-200 at 1000 rpm Roof | 1,000 | 0.25 | 1,500 | 13 | 62 | 15 | 2 | 0.79 |
| M-200 at 1500 rpm Roof | 1,500 | 0.37 | 2,400 | 37 | 66 | 15 | 2 | 0.96 |
| M-200 at 3000 rpm Roof | 3,000 | 1.5 | 3,300 | 150 | 81 | 24 | 9.37 | 2.9 |
| M-200VG at 1000 rpm Roof | 1,000 | 0.37 | 1,584 | 48 | 58 | 23 | 2.78 | 1.07 |
| M-200VG at 1500 rpm Roof | 1,500 | 0.55 | 2,400 | 72 | 69 | 23 | 3.7 | 1.41 |
| M-250 at 1500 rpm Roof | 1,500 | 1.5 | 3650 | 70 | 69 | 43 | 8.5 | 3.3 |
*Sound pressure with free output at 1.5m.