POLYPROPYLENE FUME CUPBOARDS

VRT Series Fume cupboards

POLYPROPYLENE FUME CUPBOARDS

VHT Series Fume cupboards

POLYPROPYLENE FUME CUPBOARDS

Special fume cupboards

VRT Series Polypropylene Laboratory Fume Cupboards

Made entirely of plastic material, with maximum chemical resistance

The VRT Series Polypropylene (PP-H) fume cupboards offer a simple and cost-effective solution for a safe and corrosion-resistant workspace.

The front opening consists of a transparent guillotine made of Polycarbonate (PC) or methacrylate (PMMA), with a pulley system. The back wall includes a plastic diffuser. The extraction outlet at the top involves a suction collector.

The standard equipment of the corrosion-resistant fume cupboards in the VRT series includes:

– Waterproof interior light.
– Two single-phase sockets.
– Push-button panel for ignition and interior light.

*Standard measurements can be modified.

Reference Description L W H Ø *Flow rate
VITRRTPP900 PP cuboard VRT-900 Tabletop 900 750 1700 160 mm 648 m3/h
VITRRTPP1200 PP cupboard VRT-1200 Tabletop 1200 750 1700 200 mm 864 m3/h
VITRRTPP1500 PP cupboard VRT-1500 Tabletop 1500 750 1700 250 mm 1080 m3/h
VITRRTPP1800 PP cupboard VRT-1800 Tabletop 1800 750 1700 250 mm 1296 m3/h

*Recommended flow rate to generate sufficient air extraction.

VHT Series PPH Polypropylene Laboratory Fume Cupboards

Comprehensively equipped fume cupboards

The VHT Series fume cupboards, offer the most comprehensive and resistant solution for achieving a safe working area in a confined space, with a high level of corrosion resistance and air extraction. These fume cupboards are made entirely of polypropylene, providing a high level of resistance to chemical products. The front has a transparent guillotine opening with a polypropylene frame that works via a pulley system. The back wall includes a plastic diffuser. A suction collector is located at the upper extraction outlet.

The lower section of the complete VHT series has a storage compartment with air renewal. Ventilation is performed from the rear by means of a single 75mm diameter duct.

The standard equipment of the VHT Series anti-corrosion fume cupboards includes:
– Waterproof interior light.
– Two single-phase sockets.
– Display with button panel for ignition and light and air spreed reader.
– Cold water tap with a 300x150mm basin.

*Standard measurements can be modified.

VHT SERIES – Tabletop

Reference Description L W H Ø *Flow rate
VITRHTPP1200 PP fume cupboard VHT-1200 Tabletop
 1200 750 1700 250 mm 864 m3/h
VITRHTPP1500 PP fume cupboard VHT-1500 Tabletop
 1500 750 1700 250 mm 1080 m3/h
VITRHTPP1800 PP fume cupboard VHT-1800 Tabletop
 1800 750 1700 250 mm 1296 m3/h
VITRHTPP2100 PP fume cupboard VHT-2100 Tabletop
 2100 750 1700 2-200 mm 1512 m3/h

*Recommended flow rate to generate sufficient air extraction.

REQUEST INFORMATION

SERIE VHT – Complete

Reference Description L W H Ø *Flow rate
VITRHTPP1200 PP fume cupboard VHT-1200 Complete 1200 750 2170 250 mm 864 m3/h
VITRHTPP1500 PP fume cupboard VHT-1500 Complete 1500 750 2170 250 mm 1080 m3/h
VITRHTPP1800 PP fume cupboard VHT-1800 Complete 1800 750 2170 250 mm 1296 m3/h
VITRHTPP2100 PP fume cupboard VHT-2100 Complete 2100 750 2170 2×200 mm 1512 m3/h

*Recommended flow rate to generate sufficient air extraction.

REQUEST INFORMATION

Special FUME CUPBOARDS

We adapt to your needs

Design and manufacture of fume cupboards for special high-corrosion applications. Tabletop or complete fume cupboards made entirely of plastic, Polypropylene (PP-H). This material makes the equipment highly resistant to chemical agents. Maximum working temperature 80ºC.

Solution for metal-free laboratories where there may be no metal components.

This equipment is custom designed and manufactured. The built-in systems are:

  • Vertical laminar flow system with particle filtration system using a H14 filter. This system guarantees the safety of the samples being handled inside the fume cupboard. The particle filters can have various levels of efficiency.
  • The drive system comprises a double suction fan mounted on a filter box made entirely of plastic.
  • Automatic adjustment systems based on pressure probes keep the flow rate constant without being dependent on filter saturation.

In this type of fume cupboard, the air is extracted through a ventilation duct. The air introduced via laminar flow does not exit from the front as the interior of the cupboard is at a lower pressure.

These are used to work in corrosive processes that require a specific air quality and where the gases emitted must also be extracted.

Manufacturing details for Special fume cupboards:

  • Widths available from 900mm to 2100mm.
  • The fume cupboards may have a guillotine or folding door opening. The fronts can be made of PMMA, Polycarbonate or Glass. Depending on the process.
  • Available in Grey (RAL-7032) or White (RAL-9016) polypropylene.
  • Digital control panel for managing the extraction system and interior lighting.
  • Display reading of extracted air speed.
  • Variable flow system according to the position of the guillotine.
  • Control of the saturation state of the filter by means of pressure probes.
  • Self-regulation of the drive fan according to the saturation state of the filter.
  • Waterproof LED interior lighting.

*Recommended flow rate to generate sufficient air renewal