Fans with direct flange connection
Single-suction centrifugal fans, made of polypropylene (PP-H), highly resistant to chemical corrosion, used for extracting corrosive gases. Fans without motor support, supported via a PP flange at the inlet. Turbines with forward or backward blades depending on the model, directly coupled to the drive shaft, IP55 protection, Class F. Maximum working temperature recommended from -10ºC to +65ºC. Motors with IE2 efficiency up to 0.55kW. Premium models with IE3 efficiency.
*The ECODESIGN Directive 2009/125/EC does not apply to the range of anti-corrosion fans.
Motors:
– 2, 4 and 6 poles, according to versions.
– Standard supply voltage 230-400v 50Hz.
– Special 60Hz windings on request.
– Single-phase models 230V-50Hz, on request.
– Motors with powers above 0.55kW energy efficiency IE3.
Fan accessories
Frequency inverter
Wall mounting bracket
Floor mounting bracket
Anti-bird grid
Expansion hat
Engine cover
Inspection register
Anti-vibration
Soundproof box
Fender grille
Coupling flange
Electrical panel
Isolator switch
Ventilation pipes and accessories
Flexible Sleeve
Flexible sleeve corrugated
Flexible Ventilation hose
Strap Clamp
Volume control damper
Volume control damper motorized 0º-90º
Flap trap
Reductions
T-Pieces 90º
T-Pieces 45º
End caps
Trims
Umbrella. Rain protection
Rod roll
Sampling piece
Differential pressure probes
Intumescent rings
Fire dampers
Silencer
Table of power values
M SERIES PP STANDARD FLANGE
| Description | Turbine speed r.p.m. | Motor power kW | Max. flow rate (m³/h) | Max. pressure (mmca) | Sound pressure level (dB)* | Max. intensity 400v (A) |
|---|---|---|---|---|---|---|
| Fan PP M-75 at 1500 rpm Flange | 1,400 | 0.06 | 110 | 6 | 62 | 0.25 |
| Fan PP M-75 at 3000 rpm Flange | 2,800 | 0.09 | 210 | 25 | 50 | 0.31 |
| Fan PP M-140 at 1500 rpm Flange | 1,400 | 0.06 | 400 | 35 | 50 | 0.37 |
| Fan PP M-140 at 3000 rpm Flange | 2,800 | 0.09 | 580 | 52 | 72 | 0.31 |
| Fan PP M-160 at 1500 rpm Flange | 1,400 | 0.25 | 775 | 20 | 68 | 0.76 |
| Fan PP M-160 at 3000 rpm Flange | 2,800 | 0.37 | 1,000 | 87 | 81 | 0.95 |
| Fan PP M-160 at 3000 rpm Plus Flange | 2,800 | 0.75 | 1,690 | 87 | 86 | 1.7 |
| Fan PP M-200 at 1000 rpm Flange | 950 | 0.25 | 1,500 | 15 | 54 | 0.79 |
| Fan PP M-200 at 1500 rpm Flange | 1,400 | 0.37 | 2,200 | 38 | 70 | 0.96 |
| Fan PP M-200 at 3000 rpm Flange | 2,800 | 1.5 | 2,400 | 155 | 81 | 2.9 |
| Fan PP M-200 at 3000 rpm Plus Flange | 2,800 | 2.2 | 3,300 | 155 | 90 | 4.4 |
| Fan PP M-200VG at 1000 rpm Flange | 950 | 0.37 | 1,580 | 35 | 62 | 1.07 |
| Fan PP M-200VG at 1500 rpm Flange | 1,400 | 0.55 | 2,400 | 73 | 77 | 1.41 |
*Sound pressure with free output at 1.5m.