Used to extract corrosive gases in potentially explosive environments
Corrosion-resistant centrifugal fans with single aspiration, used for extracting corrosive gases. Made of electro-conductive polypropylene PP-EL-S, with forward or backward blades depending on the model, directly coupled to the motor shaft; IP65. Fans built to work in zones classified as Zone 1 Indoor and 2 Outdoor according to European Directive 2014/34/EU, from 2016. Working temperature from -10ºC to +60ºC.
*The ECODESIGN Directive 2009/125/EC does not apply to the range of anti-corrosion fans.
Motors:
– 2, 4 and 6 poles, according to versions.
– Standard supply voltage 230-400v 50Hz.
– Special 60Hz windings on request. Single-phase models 230V 50/60Hz, on request.
Increased safety motor:
– II 2G EEx-e II T3
– Explosion-proof motor
– II 2G EEx-d IIC T4 IP-65 with PTC probe.
*PTC (Positive Temperature Coefficient) probe. Temperature-resistant sensor.
Fan accessories
Frequency inverter
Wall mounting bracket
Floor mounting bracket
Anti-bird grid
Expansion hat
Engine cover
Inspection register
Anti-vibration
Soundproof box
Fender grille
Coupling flange
Electrical panel
Isolator switch
Ventilation pipes and accessories
Flexible Sleeve
Flexible sleeve corrugated
Flexible Ventilation hose
Strap Clamp
Volume control damper
Volume control damper motorized 0º-90º
Flap trap
Reductions
T-Pieces 90º
T-Pieces 45º
End caps
Trims
Umbrella. Rain protection
Rod roll
Sampling piece
Differential pressure probes
Intumescent rings
Fire dampers
Silencer
Fan position
Table of power values
SERIES M ATEX PP-EL-S
| Description | Turbine speed r.p.m. | Motor power kW | Max. flow rate (m3/h) | Max. pressure (mmca) | Sound pressure level (dB) | Weight (Kg) | Max. intensity 400v(A) |
| M-75 at 3000 rpm ATEX | 3,000 | 0.12 | 210 | 25 | 64 | 3 | 0.31 |
| M-140 at 1500 rpm ATEX | 1,500 | 0.09 | 405 | 34 | 56 | 6.5 | 0.37 |
| M-140 at 3000 rpm ATEX | 3,000 | 0.12 | 615 | 51 | 60 | 6.5 | 0.31 |
| M-160 at 1500 rpm ATEX | 1,500 | 0.25 | 830 | 20 | 54 | 10 | 0.76 |
| M-160 at 3000 rpm ATEX | 3,000 | 0.37 | 1,600 | 70 | 69 | 10 | 0.95 |
| M-200 at 1000 rpm ATEX | 1,000 | 0.25 | 1,500 | 13 | 62 | 15 | 0.79 |
| M-200 at 1500 rpm ATEX | 1,500 | 0.37 | 2,400 | 37 | 66 | 15 | 0.96 |
| M-200 at 3000 rpm ATEX | 3,000 | 1.5 | 3,300 | 150 | 81 | 24 | 2.9 |
| M-200VG at 1000rpm ATEX | 1,000 | 0.37 | 1,584 | 48 | 58 | 23 | 1.07 |
| M-200VG at 1500rpm ATEX | 1,500 | 0.55 | 2,400 | 72 | 69 | 23 | 1.41 |
| M-250 at 1500 rpM ATEX | 1,500 | 1.5 | 3,650 | 70 | 69 | 38 | 3.3 |
| M-250 at 3000 rpm ATEX | 3,000 | 5.5 | 6,500 | 250 | 94 | 95 | 11 |
| M-315 at 1000 rpm ATEX | 1,000 | 1.5 | 4,157 | 50 | 70 | 35 | 3.6 |
| M-315 at 1500 rpm ATEX | 1,500 | 2.2 | 4.250 | 112 | 88 | 37 | 4.6 |
| M-355 at 1000 rpm ATEX | 1,000 | 2.2 | 5,500 | 75 | 80 | 76 | 5.3 |
| M-355 at 1500 rpm ATEX | 1,500 | 4 | 8,300 | 113 | 86 | 76 | 8.8 |
*Sound pressure with free output at 1.5m